No nails, no screws
Easy to aplly
Very fast drying
Water and heat resistant
Powerful bonding
Ideal for baseboards, tiles and panels
High-viscosity and quick-fixing DEVAFIX ADHESIVE is heat, cold and humidity-resistant. Specially formulated for gluing skirting boards, corners, wood panelling, expanded polystyrene, mirrors, decotarive panels, tiling, etc, on most surfaces such as concrete, cement, paster, brick, fibreboard, metals, pastics, asbestos-cement, etc.
SURFACE APPLICATION:
DEVAFIX should be used on dry, firm, surfaces, free from dust, grease and oil.
INSTRUCTIONS:
Appy DEVAFIX to the supporting surface, either in strips or dabs. Press the material to be fixed against the applied adhesive. Remove material and wait between 1 and 15 minutes before re-attaching to make a permanent bond.
SPECIFICATIONS:
FORM: viscous paste
SP. GRAVITY: 1,3 gr/cm3
VISCOSITY: thixotropic
FLASH POINT: < -18ºC
CLEAN-UP: Clean equipment with ketone
PACKAGE: 300 ml. cartridge
STORAGE: 1 year in the original closed package
Water- free parquet adhesive
Does not contain methanol
Can be used on wooden floor types
Does not contain water
Water resistant
Fast grip
Viscous consistency
Easy to apply
Stays flexible
An adhesive based on an alcohol solution, especially designed for bonding of all types of wooden floors, large-sized parquets and pre-finished parquets. Especially suitable for sizing on cement, anhydride and asphalt flooring. Suitable for floors with radial heating.
SPECIFICATIONS:
DRYING TIME: Approx. 10 mins. under normal conditions (23ºC / 50% R.H.)
HARDENING TIME: 2-3 days, 4-5 days on asphalt
SOLID CONTENT: 70% approx.
APPLICATION TEMPERATURE: >10ºC
COVERAGE: from 1000 - 1200 g/m2 depending on the support being sized
CLEAN-UP: clean equipment with Solvent 2100
PACKAGE: 7 kg and 16 Kg
STORAGE: Approx. 12 months in the original closed package (at 15-25ºC)
V.O.C. compliant
Non flammable
Solvent free
Contains no water
Tacky consistency
Excellent wet grab
Easy to spread
Great elasticity
Tenacious bond
Low odor
Waterproof
DEVAKOL PU is a solvent free, single component, polyurethane adhesive which does not contain water. This urethane adhesive is V.O.C. compliant, has excellent initial grab and is capable of holding down most laminates. Once cured, DEVAKOL PU becomes a tough, flexible, waterproof polymer with tenacious adhesion to a variety ofsurfaces. Great elasticity allows the adhesive to move with the wood as it expands and contracts. DEVAKOL PU can be used to bond all parquets, solid strip, laminated plank flooring, etc. on to porous or non poroussubfloors such as concrete, gypsum, cement underlayments, ceramic tiles, plywood and particle or chip board.
SPECIFICATIONS:
SPECIFIC GRAVITY: 1,16 gr/cm3
OPEN TIME: 3 hours under normal conditions
VISCOSITY: Thixotropic
COVERAGE: 300 gr/m2
TACK TIME: 1 hour approx. at 20ºC
CLEAN-UP: clean equipment with water
PACKAGE: 600 gr, 6 kg
STORAGE: At least 9 months in the original closedpackage
Protects the wood
Water resistant
Hard wearing in outdoor
Single-component
Non-toxic, flameproof
UV Resistant
Contains fungicides
DEVA-PRO is an acrylic vernish in aqueous dispersion. It is recommended for all types of wooden supports, whether exterior or interior, and is ideal for use on windows, doors, furniture, blinds, etc. Highly resistant to water, its microporous structure allows the water inside the wood to sweat, thereby controlling humidity, avoiding the formatiion of blisters and preventing the wood from splitting. It protects against the sun, avoiding burns and loss of colour. Its formulation moreover contains insecticides and fungicides for preserving the wood. Do not apply to woods with more than 15% humidity.
SPECIFICATIONS:
SOLID CONTENT: 33%
VISCOSITY: 17-19” ford cup 4 at 20ºC
DRYING TIME: 2 hrs. at 20ºC and 60% R.H.
CLEAN-UP: clean equipment with clear water
COVERAGE: 10-12 m2 /lt.
PAKAGE: 3 x 5 lt.
STORAGE: At least one year in the original closedpackage
Adheres all types of wooden floors
Does not contain water
Does not dampen the parquet, thus avoiding deformations
Easy to apply
Stays elastic
Strong Bond
Low in odour
A two-component, polyurethane-epoxy adhesive specially suitable for bonding all types of wooden flooring, whether varnished or unvarnished: parquets, floorboards, etc., on conventional bases of cement, concrete, veneered boards, plywood, anhydrides, ceramics, etc.
SPECIFICATIONS:
DRYING TIME: Up to 60 mins. under nolmal conditions
APPLICATION TEMPERATURE: 5º-30ºC. Do not apply at temperatures below -10ºC.
LENGTH OF TIME MIXTURES LASTS: ±1 heure at 25ºC and 3 h. at 15ºC.
COVERAGE: Approx. 1000-1200 g/m2 depending on the state of the surface to be covered
CLEAN UP: clean the utensils with Solvent 2100. Dry spots should be removed by mechanical means
PACKAGE: Part A: 9 kg.• Part B: 1kg.
STORAGE: store the product in a cool place (5-25ºC).12 months in the original closed package.
Odourless and easy to apply
Non yellowing
Excellent chemical and scuff resistance
Excellent leveling
Good sanding properties
Environmentally safe
COMFORT is a one component waterbased self crosslinking wood floor finish with excellent chemicaland scuff resistance non yellowing and highly durable for interior use on heavy traffic residential, commercialand sports harwood floors. Excellent resistance to the majority of everyday chemicals and easy to maintain. COMFORT is very safeto handle, is non toxic and non flammable.
SPECIFICATIONS:
SOLID CONTENT: 33%
VISCOSITY: 17-18” ford cup 4 at 20ºC
DRYING TIME: 2 hr at 20ºC and 50% R.H.
COVERAGE: 12-15 m2 /L
CLEAN-UP: clean equipment with water
PACKAGE: 3 x 5 L
STORAGE: At least one year in the original closed package
Gives a warm natural color
Good scratch resistance
Extremelly durable
One componet
Environmentally safe
V.O.C. compliant
STAR is a one component, ready-to-use, waterborne wood floor finish for all types of hardwood floorssubject to intense wear. Easy to apply, non yellowing and virtually odourless. Available in gloss, satin and matt. STAR helps maintain the natural colour and appearance of the floor. Excellent resistance to the majority of everyday chemicals and easy to maintain, STAR is very safe to handle, is non toxic and non flammable.
SPECIFICATIONS:
SOLIDCONTENT: 33%
VISCOSITY: 22-23” Ford cup 4 at 20ºC
DRYING TIME: 4-6 hr at 20ºC and 50 % R.H.
COVERAGE: 8-10 m2 /l
CLEAN-UP: clean equipment with water
PACKAGE: 3 x 5 L
STORAGE: At least one year in the original closed package
Gives a warm natural colour
Non yellowing
Easy clean off the scuff marks
Excellent durability and slip resistant
One component
Non toxic, non flammable
OLYMPIC is a one component, waterborne wood floor finish specially developed for finishing wooden sports floors such as squash courts, gymnasiums, stage, dance floors, etc. Is very resistent to wear safe and easy to use. Available in gloss, satin and matt.
SPECIFICATIONS:
SOLID CONTENT: 33%
VISCOSITY: 22-23” ford cup 4 at 20ºC
DRYING TIME: 4-6 hr at 20ºC and 60% R.H.
COVERAGE: 8-10 m2 /L
CLEAN-UP: clean equipment with wate
PACKAGE: 3 x 5 L
STORAGE: At least one year in the original closed package
Extremely wear resistant
Scratch resistance
Exceptional durability
Safe to handle
Non yellowing
TRANSIT is a two component, waterborne wood floor finish for commercial or residential floors subject to intense wear. Easy to apply, non yellowing and virtually odourless. V.O.C. compliant. Available in matt helps maintain the natural colour and appearance of the floor. The combination of hardness and elasticity provides exceptional durability and excellent resistance to the majority of everyday chemicals. Transit is very safe to handle, non toxic and non flammable.
SPECIFICATIONS:
SOLID CONTENT: 30%
VISCOSITY: 20” ford cup 4 at 20ºC
DRYING TIME: 4 hr at 20ºC and 60 % R.H.
COVERAGE: 8-10 m2 /L
CLEAN-UP: clean equipment with water
PACKAGE: 3 x 5 L
STORAGE: At least one year in the original closed package
Seals the wood
Fast drying
One component
Non toxic
Non flammable
PRIMER is a one-component, ready-to-use, waterborne sealer. Designed to be used on freshly sandedwooden floors. PRIMER seals the pores of wood and prevents the finish from penetreting into the surfaceof the wood. It is a clear, non-yellowing, fast-drying and tough sealer with excellent sanding characteristics. Designed specifically to be used with DEVA SEAL FINISHES.
SPECIFICATIONS:
SOLID CONTENT: 35% (mixture)
VISCOSITY: 22-23” ford cup 4 at 20ºC
DRYING TIME: 2-3 hr at 20ºC and 60% R.H.
COVERAGE: 7-9 m2 /L
CLEAN-UP: clean equipment with water
PACKAGE: 3 x 5 L
STORAGE: At least one year in the original closed package
Used as a binder
Easy to apply
Fast drying
Does not shrink
Compatible with all types of finishes
Carefully mix RESIPLAS with your fine sanding dust to create your very own custom filler. This paste can be used as a very suitable wood filler for plugging floor joints, cracks and any imperfections in wooden floors. Dries very quickly, sands easily and is compatible with all types of sealers or finishes. RESIPLAS should never be used as base coat sealer.
SPECIFICATIONS:
FORM: colourless liquid
VISCOSITY: 50” ford cup 8
SP. GRAVITY: 0,894 gr/cm3
CLEAN-UP: clean equipment with PU 2 2
PACKAGE: 5 kg, 10 kg
STORAGE: 6 months in the original closed package